- High Shock Accelerometers
- 2017-12-15 20:18
- Shock sensors are widely applied on automotive crash testing, high-g near-filed pyroshock testing and the structural integrity testing of portable devices, packaging and equipment. These series have high sensitivity and is very stable. DTC shock sensors a
- VENZO 640 Shock Test System
- 2017-12-03 18:39
- VENZO 640 Shock Test System Features · Capture transient signals with specified trigger level, slop and position · 100Mbps Ethernet port connection · Capture Duration: 1ms-10,000ms · Pulse Duration: 0.05ms to 5,000ms · Maximum sampling rate up to 204.8 kH
- VESSTA 9EX MIMO Vibration Controller
- 2017-12-01 01:54
- Based on the impedance matrix compensation decoupling control, it can accurately control the coherence and the phase between the reference spectrums, achieve online control error correction, to adapt the system characteristics nonlinear
- Force Sensors
- 2017-11-30 22:07
- Force Sensor is defined as a transducer that converts an input mechanical force into an electrical output signal. Force Sensors are also commonly known as Force Transducers, which can be easily integrated into force measurement applications These series o
- 8210 Transducer Calibration System
- 2017-11-04 13:15
- 8210 system is suitable for voltage, charge, IEPE and TEDS types vibration transducer calibration. Adopt back-to-back comparison method (ISO 16063-21:2003) to complete acceleration transducer (or velocity transducer or vibration meter) calibration, to fas
- VENZO 820 Vibration Controller
- 2017-10-31 12:59
- Rear Panel: connectors include 2/8 Analog Input Channels, a Drive Channel, a100 BASE-T Network Port, an AUX channel (only for VENZO 880, can be adjusted to 2-axis drive control channel), a grounding-end, an External Emergency Abort Jack and a terminal blo
- VENZO 680 Shock Test System
- 2017-10-30 23:59
- VENZO 680 Shock Test System Features · Capture transient signals with specified trigger level, slop and position · 100Mbps Ethernet port connection · Capture Duration: 1ms-10,000ms · Pulse Duration: 0.05ms to 5,000ms · Maximum sampling rate up to 204.8 kH
- VENZO 8160 Vibration Controller
- 2017-10-23 14:23
- Main Classis·Dimension (mm):290*210*60 (VENZO 820); 390*280*60 (VENZO 880); 430*280*60 (VENZO 8160)·Weight:2.6 kg (VENZO 820), 4.2 kg (VENZO 880), 5.0 kg (VENZO 8160)
- VENZO 880 Vibration Controller
- 2017-10-15 18:27
- Wave Types: Half-sine, Haversine, Initial and final Peak Saw Tooth, Triangle, Rectangle and Trapezoid.Negative Pulse: Pulses can be in negative directionAveraging: Pulses can be averaged for the control.
- VESSTA 4EX MIMO Vibration Controller
- 2017-09-17 01:45
- VESSTA MIMO Vibration controller is based on PXIe Bus and DSP board Structure, by the combination of different data acquisition card and output interface card, it can realize large-scale-channel distributed data acquisition
- General Purpose Single Axis Accelerometers
- 2017-09-08 22:44
- Piezoelectric accelerometers, both IEPE and charge mode types, are designed for the applications where the actual acceleration rang is unknown, or where shock and vibration measurements are required. IEPE accelerometers featured integral electronics, and
- Modal Shakers
- 2017-08-15 17:50
- TENZO Series Modal Shakers are designed for demanding modal testing, to test small components, such as electronic assemblies and sensor calibration. The applications range from laboratory experiments and modal studies to physiological research.
- Low Force Shaker
- 2017-08-14 00:56
- TENZO series Low Force Shakers are the high-quality, compact machine with a permanent magnetic field. Be designed for long, trouble-free operation, and has a force rating of from 10N to 1000N enabling relatively heavy loads to be excited to high g levels.
- General Purpose Triaxial Accelerometers
- 2017-08-05 13:44
- General vibration applications often call for the use of rugged accelerometers that can offer flexibility in both measurement range and operating characteristics, while exhibiting proven accuracy in a variety of tests. Each sensor is offered in a variety
- VESSTA 18EX MIMO Vibration Controller
- 2017-07-07 13:20
- Based on the impedance matrix decoupling control with compensation, can accurately control the reference waveform, for online control of error correction, to adapt the system characteristics of nonlinear changes of different kinds of situation.
