- Cap Mould
- 2017-12-15 21:23
-
Model Number: MQ-O05
Key Specifications/Special Features:
4/8/12/16/24/32/36/48 cavity injection cap moldThe mold production cap have be double buckleSuitable for daily life any bottlesWhy choose us:Saving 10%-30% cost than others.1. Direct fa...
- Plastic disc top cap Mold
- 2017-12-12 04:59
-
Model Number: MQ-F03
Key Specifications/Special Features:
Cavity number: single cavity or multiple cavityCavity/core steel: ASSAB P20, 718, S136, H13, 8407 and NAK80Mold base: LKM NAKMold base standard: EDM, LKM and HASCORunner: cold runner or...
- 48mm bottle neck molds
- 2017-11-06 18:11
-
Model Number: MQ-H07
Key Specifications/Special Features:
Injection materials: ABS, PP, PET, PC, PVC, HIPS and moreMold materials: 45#, 60#, 40CR, P20H, 718H, 2738, 2316, S136 and moreCavity quantity: multiShot runner: cold or hotMold lifespan...
- Injection Mold of Water Oil Bottle Handle
- 2017-10-29 22:20
-
Model Number: MQ-C29
Key Specifications/Special Features:
Cavity number: single cavity or multiple cavityCavity/core steel: ASSAB P20, 718, S136, H13, 8407 and NAK80Mold base: LKM NAKMold base standard: EDM, LKM and HASCORunner: cold runner or...
- Genuine mineral water bottle caps mould
- 2017-10-12 17:36
-
Model Number: MQ-M10
Key Specifications/Special Features:
Injection materials: ABS, PP, PET, PC, PVC, HIPS and moreMold materials: 45#, 60#, 40CR, P20H, 718H, 2738, 2316, S136 and moreCavity quantity: multiShot runner: cold or hotMold lifetime...
- Ejector pin
- 2017-09-02 10:26
-
Model Number: 15552-455
Key Specifications/Special Features:
Injection mould ejector pinsMaterial SKD61 SKD11 SKH 51Plastic mold partInjection mould ejector pinsDescription of ejector pinStandard: hasco, DME, Rebounding etc, and nonstandard.Ma...
- Oil Cap Molds
- 2017-07-23 02:04
-
Model Number: MQ-O14
Key Specifications/Special Features:
Cavity number: single cavity or multiple cavityCavity/core steel: ASSAB P20, 718, S136, H13, 8407 and NAK80Mold base: LKM NAKMold base standard: EDM, LKM and HASCORunner: cold runner or...
